Unigeogrid site Mesh ????? unigeogrid site is a mesh of polymer as the main raw material, 13663286655 adding some UV protection, anti-aging aids, through a one-way stretched so that the original distribution chain shaped molecules scattered linear re-aligned state, by extrusion pressed into sheets and then washed rules mesh, then vertical stretching high strength geotextile material. This process, polymer and formed into a linear state directional distribution, node strength oblong mesh overall structure. This structure has a very high tensile strength and tensile modulus, tensile strength reached 100-200Mpa, close to the level of low-carbon steel, much better than the traditional or existing reinforced materials, especially the company of such More products with ultra high international level of early (elongation at 2% -5%) tensile strength and tensile modulus. Soil provides the ideal force commitment and the proliferation of chains. The product tensile strength (> 150Mpa), to adapt to a variety of soil, is currently widely used in reinforced reinforcement. Its main features are: high tensile strength, good creep resistance, easy construction, low prices. Constituent materials unigeogrid site mesh is made of polymer (PP or HDPE) by extrusion pressed into sheets and then washed rules mesh, and vertical stretching. This process, polymer and formed into a linear state directional distribution, node strength oblong mesh overall structure. Uniaxial geogrid is a high strength geosynthetics. The main purpose of the site unigeogrid Mesh 1 ,? way geogrid reinforced soft ground: geogrid can rapidly improve the bearing capacity, settlement control the development of side effects limit road base can effectively to the load distribution to the wider sub-base, thus reducing the base thickness, reducing construction costs, shorten the construction period and prolong life. 2 ,? way geogrid reinforced asphalt or concrete pavement: geogrid laid on asphalt or concrete overlay on the bottom, can reduce rut depth, extend the pavement fatigue life, but also can reduce the thickness of asphalt or concrete pavement to cost savings. 3 ,? way geogrid reinforced road embankment slopes and retaining walls Buddha: the traditional embankment filling, especially the high embankment and shoulder often require ultra-edge easily compacted fill, causing flooding in the late slope of the rain hit, collapse instability phenomena occur at the same time need to use more moderate slope, large area, retaining walls have the same problem, the use of geogrid reinforced embankment slopes or retaining walls can reduce half an account land area, long life, low cost of 20-50%. 4 ,? way geogrid reinforced river dikes: gabion can be made, then the grid and used to prevent dam collapse caused by the sea erosion, gabion permeable, can slow the impact of the waves, to extend the life of the dam, save resources, shorten the construction period. 5 ,? way geogrid used to process landfill: geogrid synthetic materials combined with other land use process landfill, can effectively solve the uneven settlement of foundation, derived gas emissions and other issues, and maximize improve storage capacity landfill. 6 ,? way geogrid special purpose: resistance to low temperature resistance. Yifeng's resistance to low temperature geogrid at -45 ℃ --- 50 ℃ repeated thermal cycling 200 times, the performance indicators are to meet the requirements, and the Qinghai-Tibet Railway has been tested for a few frozen northern soil rich frozen soil, high ice content permafrost adverse geology. When used for embankment construction methods, pavement, construction methods and two-way geogrid same. When used in reinforced earth retaining wall, one-way geogrid mesh construction site as follows: 1, set the foundation, according to the design of the wall system construction, when elected to the use of precast reinforced concrete panels, usually thick 12-15 cm supported on precast concrete foundation. Its width is not more than 30 cm, thickness not less than 20 cm, depth of not less than 60㎝ prevent heaving affected. 2, flat base of the wall, according to design requirements excavation, leveling. Soft soil compaction or change need to fill, compacted to the required density, should be slightly beyond the scope of the wall. 3, laying reinforcement, reinforcement should be perpendicular to the direction of the main strength of the wall to pin fixed. 4, filling the wall,? With mechanical filling distance between the wheels and the reinforcement should be kept at least 15 cm. 20-15㎝ thick layer of soil compaction. 5 ,? wall construction, the wall of the bag should geotextile to prevent leakage of fill. Picture price for reference only specific contact customer service, thank you! King County Extension of Rubber Products Co., Ltd. Tel: 0318-2119256 Mobile: 13663286655 Contact: Yanjing Li-mail: tuodaxiangsu@163.com QQ: 78644862